Audio-note AN-J User Manual download pdf (Page 10)

CONNECTION continued…

On the rear of your amplifier, identify the loudspeaker output terminals; they should

be labeled ʻLEFTʼ and “RIGHTʼ.

Facing your amplifier and loudspeakers, connect the left loudspeaker to the ʻLEFTʼ

loudspeaker outputs on your amplifier, and the right loudspeaker to the ʻRIGHTʼ

loudspeaker outputs on your amplifier.

If your amplifier is equipped with multiple loudspeaker output terminals, consult the

manual for the unit to ascertain the appropriate connection regime.

The facility to split the crossover of the AN-J allows the speakers to be operated in a

bi-wired or bi-amplified mode. The crossovers are split by removing the connecting

links between the HF and LF terminals on the rear of the speaker.

Bi-wiring This involves running two sets of cables to the rear of each

speaker, so that the Low Frequency (LF) section of the

crossover is fed by one set and the High Frequency (HF)

section by the other. Both sets of cables are attached together

to the corresponding pair of terminals on the back of the

amplifier.

We strongly recommend bi-wiring the AN-J with a suitable

loudspeaker cable from the Audio Note (UK) range.

Bi-amplifying This involves using two stereo or four mono power amplifiers

to drive the loudspeakers. If you intend to ʻbi-ampʼ the

AN-E, please consult your amplifiers manual(s) for the

appropriate connection regime.

If you are in any way uncertain as to the correct method of connection for your

amplifier or loudspeakers, please consult your Audio Note (UK) dealer.

Special Note – Make sure that all connections are tight and clean. For best results

use good quality loudspeaker cables. Although it is perfectly acceptable to use

cables manufactured by other companies, for best results and performance, we

recommend our own Audio Note (UK) range of interconnects and loudspeaker

cables. For further information, please consult your nearest Audio Note (UK) dealer,

or alternatively please feel free to contact us directly.

1 2 ... 5 6 7 8 9 10 11 12 13 14

No comments

Audio-note AN-J User Manual Page 10