Audio Note M10 Line Specifications Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Connections
Please ensure that the M10 Line, the power amplifier and any source equipment is
switched off before making any connections.
NOTE: It is important that all connections are firm, secure and airtight; any
oxidisation of the interconnects will result in loss of performance. Always use high
quality interconnects; Audio Note interconnects are recommended, as they are
manufactured to the same exacting standards as all of our products.
Inputs
The M10 Line offers three standard unbalanced line inputs, which are suitable for
connecting to any line level source equipment such as a CD/DVD player or a
dedicated phono stage for a turntable. Each input consists of a pair of RCA
connectors, one red and one white, for right and left channels respectively
A balanced input option is also provided, consisting of a pair of XLR connectors.
Outputs
The M10 Line provides two unbalanced outputs, again each consisting of a pair of
RCA connectors, and a balanced output, consisting of a pair of XLR sockets.
The two unbalanced outputs are for connection to a power amplifier and are identical,
making them suitable for biwiring. The balanced output can be used for low noise
connection to a power amplifier with a balanced input. The balanced and unbalanced
outputs cannot be used simultaneously; select the appropriate output using the toggle
switch.
Ground Post
A ground connection is provided to assist in the elimination of any ground loops that
may occur. A ground loop can be identified by excessive background hum. If you
experience a ground loop, try connecting the ground connection with that of other
system components. If the hum persists, contact your dealer.
Mains Power
An IEC power connector is located on the back of each of the M10 Line PSUs. Use
the supplied power cables to connect the PSUs to the mains supply. Connect the M10
Line to the PSUs using the multi-pin cables supplied. Ensure the power is off at the
switch when you do this.
Page view 2
1 2 3 4 5 6 7

Comments to this Manuals

No comments