Audio Note ONGAKU Specifications Page 1

! ONGAKU !INTEGRATED AMPLIFIER !OWNER’S INFORMATION !

Please make sure that steps (1), (2) and (3) are correct. Check again that both valves are fully inserted correctly in to their respective valve

Line inputs Four line inputs are available, located on the left side of the amplifier, at the front of the panel. For sonic purity, it was

Once all the connections are completed and checked, ensure that the volume control is at the minimum setting (rotated all the way left). Turn

TECHNICAL SPECIFICATIONS INPUT IMPEDANCE INPUT SENSITIVITY MAXIMUM OUTPUT CHANNEL BALANCE VALVE COMPLIMENT UNIT WEIGHT SHIPPING WEI

Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of

Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: +44 (0)1273 220 511 Fax: +44 (0)1273

1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERV

SUCH REPLACEMENT MUST ONLY BE CARRIED OUT BY A QUALIFIED SERVICE TECHNICIAN. Do not attempt to replace any fuses without first disc

POWER REQUIREMENTS Power requirements for electrical equipment vary depending on your geographical location.

Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment.

ONGAKU INTEGRATED Congratulations on your purchase of the Audio Note (UK) ONGAKU Integrated Amplifier. The ONGAKU has rightly earned

Please take care when unpacking your ONGAKU Integrated Amplifier. Choose a clean, clear location to unpack your unit. Be aware that the am

The amplifier is shipped without its 6 valves installed. It is necessary to install the valves before the amplifier can be operated. It is

Inspect a 211 valve and you will notice that there is a small ‘pin’ protruding from one side of the valve base; this locating pi