Audio Note TOMEI Kensei Specifications download pdf (Page 11)

Line inputs Four line inputs are available, located on the left side of the amplifier,

at the front of the panel. For sonic purity, it was decided to not offer

any tape / pre outputs on the TOMEI. All four inputs are line level, and

can be connected to a suitable line level source of your choice, such

as CD / DAC, phonostage, etc.

Ground Post A ground post is provided for connection to those source components

that also use a separate ground terminal.

Speakers Each channel is equipped with 2 colour coded binding posts for

connection to your speakers.

Looking from the front of the amplifier, the 2 binding posts to the left

are for the left channel and the 2 binding posts to the right are for the

right channel.

Connect the amplifiers black speaker output binding post to the black /

negative terminal (also marked “ – “) on the speaker.

Connect the amplifiers red speaker output binding post to the red /

positive terminal (also marked “ + “) on the speaker.

Mains The TOMEI uses an IEC 320 mains inlet socket. Use the supplied

mains cable to connect the unit to the local mains supply. The mains

fuse and a spare are located in the inlet socket fuse drawer.

Special Note – Make sure that all connections are tight and clean. For

best results use good quality audio interconnects. Although it is

perfectly acceptable to use cables manufactured by other companies,

for best results and performance, we recommend our own Audio Note

(UK) range of interconnects and loudspeaker cables. For further

information, please consult your nearest Audio Note (UK) dealer, or

alternatively please feel free to contact us directly.

CONNECTION

1 2 ... 6 7 8 9 10 11 12 13 14 15

No comments

Audio Note TOMEI Kensei Specifications Page 11