Audio-note Quest User Manual download pdf (Page 8)

Line inputs Being mono power amplifiers, each QUEST is fitted with one single

ended / RCA input. Looking from behind the amplifiers, they are

located at the right hand side of the rear panels. Connect the outputs

from your preamplifier to these inputs.

Speakers Each amplifier is equipped with 3 colour coded binding posts for

connection to your speakers.

Looking from the rear of the amplifiers, the 3 binding posts are located

at the right hand side of the rear panels, near to the single ended /

RCA input.

Connect the amplifiers black speaker output binding post marked as

“0” to the black / negative terminal (also marked “ – “) on the

loudspeaker.

Connect the amplifiers red speaker output binding post marked “8

Ohm” to the red / positive terminal (also marked “ + “) on the

loudspeaker. The other red output binding post is marked “4 Ohm”

and may be used with 4 Ohm speakers. If you are uncertain whether

your speaker system is specified as 4 or 8 Ohm, try the following test

once all other connections are made and the amplifier is operational.

Compare the sound quality using a familiar recording with the

speakers connected to the 8 Ohm connections and then the 4 Ohm

connections respectively. The combination that produces the best

frequency balance and maximum dynamics should be used.

Mains The QUESTS use an IEC 320 mains inlet socket for each amplifier.

Use the supplied mains cables to connect the units to the local mains

supply. The mains fuse and a spare are located in the inlet socket

fuse drawer.

Special Note – Make sure that all connections are tight and clean. For

best results use good quality audio interconnects. Although it is

perfectly acceptable to use cables manufactured by other companies,

for best results and performance, we recommend our own Audio Note

(UK) range of interconnects and loudspeaker cables. For further

information, please consult your nearest Audio Note (UK) dealer, or

alternatively please feel free to contact us directly.

CONNECTION

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Audio-note Quest User Manual Page 8