Audio-note Tomei User Manual

! TOMEI !INTEGRATED AMPLIFIER !OWNER’S INFORMATION !

Looking from the back of the amplifier, insert the 5R4WGB valves into the two empty sockets located on the left, situa

Line inputs Four line inputs are available, located on the left side of the amplifier, at the front of the panel. For sonic purity, it was de

OPERATION Once all the connections are completed and checked, ensure that the volume control is at the minimum setting (rotated all the way left

TECHNICAL SPECIFICATIONS INPUT IMPEDANCE INPUT SENSITIVITY MAXIMUM OUTPUT CHANNEL BALANCE VALVE COMPLIMENT UNIT WEIGHT SHIPPING WEIGH

Audio Note (UK) warrants this product to be free from defects in materials and workmanship for two years from the original date of

Audio Note (UK) Limited 25 Montefiore Road Hove East Sussex BN3 1RD United Kingdom Tel: +44 (0)1273 220 511 Fax: +44 (0)1273

1) IMPORTANT SAFETY INFORMATION 2) CE DECLARATION OF CONFORMITY DISPOSAL POWER REQUIREMENTS 3) INTRODUCTION 4) OVERV

SUCH REPLACEMENT MUST ONLY BE CARRIED OUT BY A QUALIFIED SERVICE TECHNICIAN. Do not attempt to replace any fuses without first disc

POWER REQUIREMENTS Power requirements for electrical equipment vary depending on your geographical location.

Thank you for purchasing this Audio Note (UK) product. With the correct care it should give you many years of pleasure and enjoyment

Congratulations on your purchase of the Audio Note (UK) TOMEI Kensei Stereo Power Amplifier. It is a Pure Class A Singled Ended valve am

Please take care when unpacking your TOMEI Integrated Amplifier. Choose a clean, clear location to unpack your unit. Be aware that the amplifier is

The amplifier is shipped without the valves installed. It is necessary to install the valves before the amplifier can be operated. It is ess

Inspect a 211 valve and you will notice that there is a small ‘pin’ protruding from one side of the valve base; this locating pin